Back to AD

AD 80-02-05 ACTIVE

Flexible Fuel Hose Assembly
Key Information
AD Number 80-02-05 Status Active
Effective Date January 24, 1980 Issue Date Not specified
Docket Number Unknown Amendment 39-3655
Product Type ["Engine"] Product Subtype Not specified
CFR Part --- - Part 39 CFR Section N/A
Citation This information is not available.
Applicability
Manufacturer(s) Rolls-Royce Limited, Bristol Engines Division
Model(s) Viper Mk. 601-22
Regulatory Text

80-02-05 ROLLS ROYCE LIMITED: Amendment 39-3655. Applies to Viper MK 601-22 model engine as installed in, but not limited to, Hawker Siddeley HS 125 series 600A and Beechcraft Hawker Siddeley BH 125 series 600A aircraft.
Compliance is required as indicated unless already accomplished.
To prevent possible failure of the flexible fuel hose, accomplish the following:
(a) Within 250 hours engine time in service after the effective date of this AD, remove the flexible fuel hose assembly, Rolls Royce P/N DX 33-180-300 and install a new flexible fuel hose assembly, Rolls Royce P/N V 103813, in accordance with paragraph 2.A., "Accomplishment Instructions," of Rolls Royce Service Bulletin No. 73-A17, dated June 1978, or an equivalent approved by the Chief, Aircraft Certification Staff, AEU-100, Europe, Africa and Middle East Region, Brussels, Belgium.
(b) Upon request of an operator, an FAA Maintenance Inspector may adjust the compliance time specified in paragraph (a) of this ADto be compatible with that operator's maintenance schedule.
This amendment becomes effective January 24, 1980.