| AD Number | 46-46-03 | Status | Active |
| Effective Date | Not specified | Issue Date | Not specified |
| Docket Number | Unknown | Amendment | N/A |
| Product Type | ["Aircraft"] | Product Subtype | ["Small Airplane"] |
| CFR Part | --- - Part 39 | CFR Section | N/A |
| Citation | This information is not available. | ||
| Manufacturer(s) | Cessna Aircraft Company |
| Model(s) | T-50 |
46-46-03 CESSNA: (Was Mandatory Note 10 of AD-722-5.) Applies to T-50 Aircraft.
Inspection required not later than January 1, 1947.
Inspect the aileron and flap hinge brackets for evidence of cracking where the bearing is staked into the hinge bracket. If cracks are found, the hinge bracket should be replaced.