| AD Number | 82-01-08 | Status | Active |
| Effective Date | January 07, 1982 | Issue Date | Not specified |
| Docket Number | Unknown | Amendment | 39-4292 |
| Product Type | ["Aircraft"] | Product Subtype | ["Rotorcraft"] |
| CFR Part | --- - Part 39 | CFR Section | N/A |
| Citation | This information is not available. | ||
| Manufacturer(s) | MD Helicopters, Inc. |
| Model(s) | 369 369A 369D 369E 369H 369HE 369HM 369HS |
82-01-08 HUGHES HELICOPTERS: Amendment 39-4292. Applies to Model 369 Series helicopters, certificated in all categories.
Compliance required as indicated, unless already accomplished.
To prevent loss of control of engine power due to control rod failure, accomplish the following:
(a) Within 25 hours' additional time in service after the effective date of this AD, remove P/N 369A7706-3 RPM Governor Lever Control Rod and replace with P/N 369A7706-5 RPM Governor Lever Control Rod.
NOTE: Hughes Helicopters Notice No. DN-87 and HN-169, dated May 15, 1981, refers to this subject.
(b) Special flight permits may be issued in accordance with FAR 21.197 and 21.199 to operate helicopters to a base for the accomplishment of inspections or modifications required by this AD.
(c) Alternative inspections, modifications or other actions which provide an equivalent level of safety may be used when approved by the Chief, Engineering and Manufacturing Branch, FAA Western-Pacific Region.
This amendment becomes effective January 7, 1982.