| AD Number | 75-09-06 | Status | Active |
| Effective Date | May 05, 1975 | Issue Date | Not specified |
| Docket Number | Unknown | Amendment | 39-2176 |
| Product Type | ["Aircraft"] | Product Subtype | ["Small Airplane"] |
| CFR Part | --- - Part 39 | CFR Section | N/A |
| Citation | This information is not available. | ||
| Manufacturer(s) | Cessna Aircraft Company |
| Model(s) | A185E A185F A188 A188A A188B |
75-09-06 CESSNA: Amendment 39-2176. Applies to A185 series (Serial Numbers 18502008 through 18502650) airplanes and A188 series (Serial Numbers 18800833 through 18801374).
Compliance: Required as indicated, unless already accomplished.
To preclude the collapse of the existing flexible engine induction air duct, within the next 50 hours' time in service after the effective date of this AD, accomplish the following:
Replace the flexible engine induction air duct with a new flexible engine induction air duct (P/N 1650044-1); duct adapter (P/N 1652021-10); and drain line (P/N 0700147-82)(A185 only), in accordance with Cessna Service Letter SE75-5, dated February 7, 1975, or later approved revisions, or any alternate means of compliance approved by the Chief, Engineering and Manufacturing Branch, FAA, Central Region.
This amendment becomes effective May 5, 1975.