| AD Number | 73-23-07 | Status | Active |
| Effective Date | November 19, 1973 | Issue Date | Not specified |
| Docket Number | Unknown | Amendment | 39-1744 |
| Product Type | ["Aircraft"] | Product Subtype | ["Small Airplane"] |
| CFR Part | --- - Part 39 | CFR Section | N/A |
| Citation | This information is not available. | ||
| Manufacturer(s) | Cessna Aircraft Company |
| Model(s) | 150 150A 150B 150C 150D 150E 150F 150G 150H 150J 150K 150L 150M 172 172A 172B 172C 172D 172E 172F (USAF T-41A) 172G 172H (USAF T-41A) 172I 172K 172L 172M 172N 172P 172Q 172R 172RG 172S 180 180A 180B 180C 180D 180E 180F 180G 180H 180J 180K 182 182A 182B 182C 182D 182E 182F 182G 182H 182J 182K 182L 182M 182N 182P 182Q 182R 182S 182T 185 185A 185B 185C 185D 185E A150K A150L A150M |
73-23-07 CESSNA: Amdt. 39-1744. Applies to Model 150 (S/Ns 15074635 thru 15074799); Model A150 (S/Ns A1500415 thru 1500427); Model 172 (S/Ns 17261664 thru 17261808); Model 180 (S/Ns 18052335 thru 18052349); Model 182 (S/Ns 18261960 thru 18262105) and Model 185 (S/Ns 18502199 thru 18502238) airplanes.
Compliance: Required as indicted, unless already accomplished.
To prevent defective spar attachment fitting from remaining in service, within the next 50 hours' time in service after the effective date of this AD, replace P/N 0523306 wing attach fittings with Cessna Service Kit SK 150-45A, dated July 27, 1973, referred to in Cessna Service Letter SE73-20, dated August 17, 1973, or later FAA-approved revisions, or with any other airworthy part approved by the Chief, Engineering and Manufacturing Branch, FAA, Central Region.
This amendment becomes effective November 19, 1973.