| AD Number | 47-14-01 | Status | Active |
| Effective Date | Not specified | Issue Date | Not specified |
| Docket Number | Unknown | Amendment | N/A |
| Product Type | ["Aircraft"] | Product Subtype | ["Small Airplane"] |
| CFR Part | --- - Part 39 | CFR Section | N/A |
| Citation | This information is not available. | ||
| Manufacturer(s) | Bellanca Aircraft Corporation |
| Model(s) | 14-13 14-13-2 |
47-14-01 BELLANCA: (Was Mandatory Note 5 of AD-773-5.) Applies to Models 14- 13, 14-13-2 Serial Numbers 1060 to 1409, Inclusive.
Compliance required prior to June 1, 1947.
Replace the aluminum alloy inboard flap hinge brackets with X4130 steel brackets, Bellanca P/N 7998-1.
Bellanca Service Bulletin No. 7 dated January 14, 1947, covers this same subject.)