| AD Number | 86-13-03 | Status | Active |
| Effective Date | July 24, 1986 | Issue Date | Not specified |
| Docket Number | Unknown | Amendment | 39-5337 |
| Product Type | ["Aircraft"] | Product Subtype | ["Large Airplane"] |
| CFR Part | --- - Part 39 | CFR Section | N/A |
| Citation | This information is not available. | ||
| Manufacturer(s) | Dassault Aviation |
| Model(s) | Falcon 10 |
86-13-03 AVIONS MARCEL DASSAULT - BREGUET AVIATION: Amendment 39-5337. Applies to Model Falcon 10 series airplanes, serial numbers 1 through 206 inclusive, certificated in any category. Compliance is required within 60 days after the effective date of this AD. To detect an incorrectly wired automatic leading edge slat selector valve, accomplish the following in accordance with AMD-BA Service Bulletin F10-27-31(-247), dated July 18, 1984, unless previously accomplished.
A. Test the automatic leading edge slat extension system, and revise the leading edge slat selector valve wiring, if necessary.
B. An alternate means of compliance or adjustment of the compliance time, which provides an acceptable level of safety, may be used when approved by the Manager, Standardization Branch, ANM-113, FAA, Northwest Mountain Region.
C. Special flight permits may be issued in accordance with FAR 21.197 and 21.199 to operate airplanes to a base for the accomplishment of inspectionsand/or modifications required by this AD.
All persons affected by this directive, who have not already received the appropriate service document from the manufacturer, may obtain copies upon request to the AMD-BA Representative, 40 J.J.C., Teterboro Airport, Teterboro, New Jersey 07608. This document may be examined at the FAA, Northwest Mountain Region, 17900 Pacific Highway South, Seattle, Washington, or the Seattle Aircraft Certification Office, 9010 East Marginal Way South, Seattle, Washington.
This amendment becomes effective July 24, 1986.