| AD Number | 82-18-07 | Status | Active |
| Effective Date | September 07, 1982 | Issue Date | Not specified |
| Docket Number | Unknown | Amendment | 39-4446 |
| Product Type | ["Aircraft"] | Product Subtype | ["Large Airplane"] |
| CFR Part | --- - Part 39 | CFR Section | N/A |
| Citation | This information is not available. | ||
| Manufacturer(s) | Bombardier Inc. |
| Model(s) | CL-600-1A11 (CL-600) |
82-18-07 CANADAIR: Amendment 39-4446. Applies to Canadair Model CL-600-1A11 airplanes, serial numbers 1005 through 1007, 1010 through 1014, and 1016 through 1023, certificated in all categories.
Compliance is required as indicated to prevent possible temporary interruption of the stall protection system stick pusher capability.
Accomplish the following unless already accomplished:
1. Within the next 25 hours time in service, modify the stall protection system in accordance with instructions contained in Canadair Alert Service Bulletin A600-0090, Revision 1, dated October 28, 1981.
2. Alternate means of compliance which provide an equivalent level of safety may be used when approved by the Manager, Seattle Area Aircraft Certification Office, FAA Northwest Mountain Region.
3. Special flight permits may be issued in accordance with FAR 21.197 and 21.199 to operate airplanes to a base for the accomplishment of inspections and/or modifications required by this AD. The manufacturer's specifications and procedures identified and described in this directive are incorporated herein and made a part hereof pursuant to 5 U.S.C. 552(a)(1).
This amendment becomes effective September 7, 1982.