| AD Number | 46-41-02 | Status | Active |
| Effective Date | Not specified | Issue Date | Not specified |
| Docket Number | Unknown | Amendment | N/A |
| Product Type | ["Aircraft"] | Product Subtype | ["Small Airplane"] |
| CFR Part | --- - Part 39 | CFR Section | N/A |
| Citation | This information is not available. | ||
| Manufacturer(s) | Bellanca Aircraft Corporation |
| Model(s) | 14-13 14-13-2 |
46-41-02 BELLANCA: (Was Mandatory Note 1 of AD-773-5.) Applies to Models 14-13, 14-13-2 Serial Numbers 1061, 1063 to 1075 Inclusive.
Compliance required prior to November 15, 1946.
Remove the steel bushing at the aileron control column sprocket and replace with a bronze bushing. Also remove the cadmium plating for the pin (AN 395) in the area of the bushing. The sprocket should turn freely when reassembled.
(Bellanca Service Bulletin No. 1 dated July 16, 1946, covers this same subject.)