| AD Number | 46-41-01 | Status | Active |
| Effective Date | Not specified | Issue Date | Not specified |
| Docket Number | Unknown | Amendment | N/A |
| Product Type | ["Aircraft"] | Product Subtype | ["Small Airplane"] |
| CFR Part | --- - Part 39 | CFR Section | N/A |
| Citation | This information is not available. | ||
| Manufacturer(s) | Bellanca Aircraft Corporation |
| Model(s) | 14-13 14-13-2 |
46-41-01 BELLANCA: (Was Mandatory Note 2 of AD-773-5.) Applies to Models 14-13, 14-13-2 Serial Numbers 1060 to 1111, Inclusive.
Compliance required prior to November 15, 1946.
Replace rudder bellcrank (Bellanca P/N 9817) located at the left and right ends of the rudder torque tube with parts furnished by the manufacturer which are stamped "heat-treat" in ink.
(Bellanca Service Bulletin No. 2 dated August 26, 1946, covers this same subject.)