| AD Number | 50-48-01 | Status | Active |
| Effective Date | Not specified | Issue Date | Not specified |
| Docket Number | Unknown | Amendment | N/A |
| Product Type | ["Aircraft"] | Product Subtype | ["Large Airplane"] |
| CFR Part | --- - Part 39 | CFR Section | N/A |
| Citation | This information is not available. | ||
| Manufacturer(s) | Martin-Marietta Corporation |
| Model(s) | 202 202A |
50-48-01 MARTIN: Applies to All Models 202 and 202A Aircraft Except Serial Numbers 14081 and 14082.
Compliance required not later than February 1, 1951.
To reduce the possibility of nose gear centering cam failures which result in the inability to extend the nose landing gear, cut off the locking ears of the upper centering cam (P/N 202SD81541) and fair in this cut area to the cam contour.
(Martin 202/202A Service Bulletin No. 115 covers this same subject.)