| AD Number | 77-19-05 | Status | Active |
| Effective Date | September 22, 1977 | Issue Date | Not specified |
| Docket Number | Unknown | Amendment | 39-3036 |
| Product Type | ["Aircraft"] | Product Subtype | ["Small Airplane"] |
| CFR Part | --- - Part 39 | CFR Section | N/A |
| Citation | This information is not available. | ||
| Manufacturer(s) | Allied Ag Cat Productions, Inc. |
| Model(s) | G-164A G-164B G-164B-15T G-164B-20T G-164B-34T G-164B (with 73 inch wing gap) |
77-19-05 GRUMMAN-AMERICAN: Amendment 39-3036. Applies to Models G- 164A, S/N's 1715 thru 1717 and G-164B, S/N's 240B, 242B, 243B, 244B, 246B, 251B, 252B, 253B, 254B, 257B, 258B, 264B, 269B.
To prevent hazards associated with defective flying wire terminals, part number AN665- 115L/R, accomplish the following prior to further flight:
Remove the AN665-115L/R, terminals and replace them with unused parts received from Grumman American Aviation Corporation. Installation will be in accordance with the aircraft operations and maintenance manual. Parts will be obtained from Grumman American Aviation Corporation, P. O. Box 147, Elmira, New York 14902.
The aircraft may be flown in accordance with 21.197 to a location where the AD can be accomplished.
This amendment is effective September 22, 1977.