| AD Number | 73-13-04 | Status | Active |
| Effective Date | June 20, 1973 | Issue Date | Not specified |
| Docket Number | Unknown | Amendment | 39-1651 |
| Product Type | ["Engine"] | Product Subtype | Not specified |
| CFR Part | --- - Part 39 | CFR Section | N/A |
| Citation | This information is not available. | ||
| Manufacturer(s) | Continental Motors |
| Model(s) | O-470-J O-470-K O-470-L O-470-R |
73-13-04 TELEDYNE CONTINENTAL MOTORS: Amdt. 39-1651. Applies to the following Teledyne Continental Model engines:
O-470-J
REMANUFACTURED: S/N's 46949 through 47000; 202001 through 202060.
O-470-K
REMANUFACTURED: S/N's 49210 through 49302.
O-470-L
REMANUFACTURED: S/N's 69352 through 69491.
O-470-R
NEW: S/N's 451001 through 451285.
REMANUFACTURED: 98501 through 99000; and 2120001 through 212289.
Compliance required as indicated within the next five hours time in service after the effective date of this Airworthiness Directive. Unless already accomplished inspect the carburetor bowl 1/4" drain plug for security by applying 120 to 144 in. lbs. of torque. Caution should be exercised in order not to apply excessive torque. After proper torque has been applied, check for leakage or seepage. If seepage or leakage is present, remove drain plug and check for thread damage. Replace as necessary with airworthy parts. After accomplishment of the above, place an identifying yellow dot enamel or similar paint adjacent to the drain plug.
This amendment is effective June 20, 1973, and was effective upon receipt for all recipients of the air mail letter dated May 25, 1973, which contained this amendment.