| AD Number | 83-10-04 | Status | Active |
| Effective Date | June 06, 1983 | Issue Date | Not specified |
| Docket Number | Unknown | Amendment | 39-4653 |
| Product Type | ["Aircraft"] | Product Subtype | ["Large Airplane"] |
| CFR Part | --- - Part 39 | CFR Section | N/A |
| Citation | This information is not available. | ||
| Manufacturer(s) | Hamburger Flugzeugbau G.m.b.H. |
| Model(s) | HFB 320 Hansa |
83-10-04 MESSERSCHMITT-BOLKOW-BLOHM GMBH: Amendment 39-4653. Applies to HFB-320 airplanes serial numbers 1021-1023, 1026, 1027, 1030-1040, 1045, and 1049-1057. To prevent failure of the horizontal stabilizer attachment fittings accomplish the following, unless already accomplished:
1. Visually inspect the horizontal stabilizer attachment fittings and adjacent structure for corrosion and cracks in accordance with paragraph I of the "Accomplishment Instructions" of Messerschmitt-Bolkow-Blohm GMBH Service Bulletin 55-7 dated September 7, 1979, within 300 hours time in service or one year, whichever occurs first, for airplanes with a maximum of 1500 hours on the horizontal stabilizer on the effective date of this AD, and within 50 hours time in service or two months, whichever occurs first, for airplanes with more than 1500 hours on the horizontal stabilizer.
2. Rework the horizontal stabilizer in accordance with paragraph 7.1 or 7.2, as appropriate, of the service bulletin within the time intervals specified in the service bulletin.
3. Alternate means of compliance which provide an equivalent level of safety may be used when approved by the Manager, Seattle Aircraft Certification Office, FAA, Northwest Mountain Region.
4. Special flight permits may be issued in accordance with FAR 21.197 and 21.199 to operate airplanes to a base for the accomplishment of inspections and/or modifications required by this AD.
This amendment becomes effective June 6, 1983.