| AD Number | 65-21-01 | Status | Active |
| Effective Date | January 28, 1975 | Issue Date | Not specified |
| Docket Number | Unknown | Amendment | 39-2077 |
| Product Type | ["Appliance"] | Product Subtype | Not specified |
| CFR Part | --- - Part 39 | CFR Section | N/A |
| Citation | This information is not available. | ||
| Manufacturer(s) | Bendix |
| Model(s) | Starters |
65-21-01 BENDIX: Amendment 39-901 as amended by Amendment 39-2077. Applies to Bendix Model Nos. 756-10C, -16A, -22C, -22E, -54C, -56C, -56E, -62C, -62D, -64C, -64D, -74B, -76A, and Garwin G-760. Starters Installed on Lycoming Engines only.
Compliance required as indicated.
To prevent starter jaw ratcheting, and assure positive starter jaw disengagement from the engine, thereby preventing jaw fracturing with associated possibility of engine failure, accomplish the following:
(a) Modify engine installed starters having less than 900 hours' in service since new or since overhaul as of the effective date of this AD, in accordance with (c) or (d) prior to 1,000 hours' in service.
(b) Modify engine installed starters having 900 hours' or more time in service since new or since overhaul as of the effective date of this AD, in accordance with (c) or (d) within the next 100 hours' in service after the effective date of the AD.
(c) Unless previously accomplished,install Bendix Service Kit SK-159 per Bendix Service Bulletin Nos. 93a and 94 in those model starters listed above that have a torque rating over 250 lb./ft. The service kit incorporates modified components and rework procedure.
(d) Unless previously modified with Service Kit SK-111, install Service Kit SK-159 per Bendix S/B 93a and 94 in those model starters that have a torque rating 250 lb./ft. or lower.
Amendment 39-901 was effective January 6, 1970.
This Amendment 39-2077 is effective January 28, 1975.