| AD Number | 48-02-01 | Status | Active |
| Effective Date | Not specified | Issue Date | Not specified |
| Docket Number | Unknown | Amendment | N/A |
| Product Type | ["Aircraft"] | Product Subtype | ["Rotorcraft"] |
| CFR Part | --- - Part 39 | CFR Section | N/A |
| Citation | This information is not available. | ||
| Manufacturer(s) | Scotts-Bell 47 Inc |
| Model(s) | 47B 47B3 |
48-02-01 BELL: Applies to All 47B Series, Through Serial Number 78.
Compliance required before next 25 hours of operation.
Reinforce the tail rotor drive shaft bearing hangers by riveting reinforcement plates, Bell P/N 47-267-001-152, -153, -154, -155, -156, and -157, to the appropriate hangers with AN 470- AD3-4 rivets.
(Bell Service Bulletin 47C56 dated September 10, 1947, also covers this subject.)