| AD Number | 63-08-05 | Status | Active |
| Effective Date | May 20, 1963 | Issue Date | Not specified |
| Docket Number | Unknown | Amendment | N/A |
| Product Type | ["Aircraft"] | Product Subtype | ["Large Airplane"] |
| CFR Part | --- - Part 39 | CFR Section | N/A |
| Citation | This information is not available. | ||
| Manufacturer(s) | Sud Aviation |
| Model(s) | Caravelle SE 210 Model III Caravelle SE 210 Model VIR |
63-08-05 SUD AVIATION: Amdt. 557 Part 507 Federal Register April 18, 1963. Applies to All SE-210 Caravelle Mark III and VIR Aircraft.
Compliance required within 300 hours' time in service after the effective date of this AD on aircraft with 2,700 or more hours' time in service on the effective date of this AD or before 3,000 hours' time in service on aircraft with less than 2,700 hours' time in service on the effective date of this AD.
To prevent overtorquing and possible failure of frequently removed flight control system bolts and to prevent failure of flight controls, accomplish the following:
(a) Remove the flight control system bolts having a shank diameter less than 6 mm. and replace them with new bolts in accordance with Sud Service Bulletin No. 27-131, Revision 2, dated October 4, 1962.
(b) Modify flight control rod ends and bellcranks in accordance with Sud Caravelle Service Bulletin No. 27-138, Revision 1, dated July 3, 1962.
NOTE: Provision (b) makes it physically impossible for improper installation of these units. Bulletin No. 27-138 lists parts which must be added on specified aircraft.
This directive effective May 20, 1963.