| AD Number | 54-24-01 | Status | Active |
| Effective Date | Not specified | Issue Date | Not specified |
| Docket Number | Unknown | Amendment | N/A |
| Product Type | ["Aircraft"] | Product Subtype | ["Rotorcraft"] |
| CFR Part | --- - Part 39 | CFR Section | N/A |
| Citation | This information is not available. | ||
| Manufacturer(s) | Scotts-Bell 47 Inc |
| Model(s) | 47B 47B3 47D 47D1 47E 47G |
54-24-01 BELL: Applies to All Models 47B, 47B3, 47D, 47D1, 47E, 47G Except 47G Serial Numbers 1286, 1287, 1294, 1295, and 1299 and Subsequent.
Compliance required no later than next 25-hour inspection.
In order to preclude improper installation of antitorque pedal assembly for dual controls, install two stop assemblies, P/N 47-722-165-1.
(Bell Mandatory Service Bulletin No. 98 dated October 29, 1954, covers this same subject and outlines the details for the installation.)