| AD Number | 73-03-03 | Status | Active |
| Effective Date | February 07, 1973 | Issue Date | Not specified |
| Docket Number | Unknown | Amendment | 39-1591 |
| Product Type | ["Aircraft"] | Product Subtype | ["Small Airplane"] |
| CFR Part | --- - Part 39 | CFR Section | N/A |
| Citation | This information is not available. | ||
| Manufacturer(s) | Alexandria Aircraft, LLC |
| Model(s) | 17-30A |
73-03-03 BELLANCA: Amdt. 39-1591. Applies to Model 17-30A (Serial Numbers 30263 through 73-30489) airplanes.
Compliance: Required as indicated unless already accomplished.
To prevent bolt failures and subsequent washer ingestion into the engine, accomplish the following:
a) Within 10 hours time in service after the effective date of this AD, remove the 4 AN4H-17A bolts attaching the air induction box to the throttle body and replace these bolts with new ones. When reassembling the air induction box, assure that the 4 washers between the spacers and the air induction box are properly installed and the bolts are torqued to 35-40 inch- pounds and safety wired.
b) Within 50 hours time in service after the effective date of this AD, modify the air induction box in accordance with Bellanca Service Letter Number 75 dated January 3, 1973, or later FAA approved revisions.
c) Any alternate equivalent method of compliance with Paragraphs a and b above must be approved by the Chief, Engineering and Manufacturing Branch, FAA, Great Lakes Region.
This amendment becomes effective February 7, 1973.