| AD Number | 47-50-05 | Status | Active |
| Effective Date | Not specified | Issue Date | Not specified |
| Docket Number | Unknown | Amendment | N/A |
| Product Type | ["Appliance"] | Product Subtype | Not specified |
| CFR Part | --- - Part 39 | CFR Section | N/A |
| Citation | This information is not available. | ||
| Manufacturer(s) | EDO Corporation |
| Model(s) | Floats |
47-50-05 AERONCA, CHAMPION. PIPER, SILVAIRE (LUSCOMBE): Applies to Airplanes Equipped With Edo Model 92-1400 Floats.
Compliance required by February 15, 1947.
To prevent the possible failure of the wirepull attachment on Edo Model 92-1400 floats, install redesigned wirepull (Edo P/N 92-S-239 on J3C-50S and J3C-65S, Edo P/N 92-S-229 on PA-11S, Edo P/N 92-S-237 and -239 on S7AC, Edo P/N 92-S-237 on S11AC, and Edo P/N 92-S-233 and -235 on Silvaire (Luscombe) 8 Series) under each of the front and rear strut attachment fittings.
(Edo Service Bulletin No. 2 dated August 15, 1947, contains detailed instructions for making this change.)