| AD Number | 47-16-03 | Status | Active |
| Effective Date | Not specified | Issue Date | Not specified |
| Docket Number | Unknown | Amendment | N/A |
| Product Type | ["Aircraft"] | Product Subtype | ["Small Airplane"] |
| CFR Part | --- - Part 39 | CFR Section | N/A |
| Citation | This information is not available. | ||
| Manufacturer(s) | Taylorcraft 2000, LLC Taylorcraft, Inc. |
| Model(s) | BC BC-65 BC12-65 BC12-D BC12-D1 BC12D-4-85 BC12D-85 BCS BCS-65 BCS12-65 BCS12-D BCS12-D1 BCS12D-4-85 BCS12D-85 BF BF-60 BF-65 BF12-65 BFS BFS-60 BFS-65 BFS12-65 BL BL-65 BL12-65 BLS BLS-65 BLS12-65 |
47-16-03 TAYLORCRAFT: (Was Mandatory Note 11 of AD-700-1: Mandatory Note 12 of AD-699-1; and Mandatory Note 13 of AD-696-3.) Applies to All Models BC, BF, and BL Series Aircraft.
Compliance required immediately.
Inspect wing strut attachment fittings on lower fuselage longerons for cracks or evidence of poor weld. If cracks or defects are found, the fitting should be replaced or reinforced.