| AD Number | 70-01-02 | Status | Active |
| Effective Date | January 03, 1970 | Issue Date | Not specified |
| Docket Number | Unknown | Amendment | 39-906 |
| Product Type | ["Aircraft"] | Product Subtype | ["Small Airplane"] |
| CFR Part | --- - Part 39 | CFR Section | N/A |
| Citation | This information is not available. | ||
| Manufacturer(s) | Cessna Aircraft Company |
| Model(s) | 177 177A |
70-01-02 CESSNA: Amdt. 39-906. Applies to Models 177 and 177A, Serial Numbers 177- 00001 thru 177-01160, 177-01165 thru 177-01168, 177-01171, 177-01174 thru 177-01178 and 177-01180, airplanes.
Compliance: Required as indicated, unless already accomplished.
To prevent possible damage to the fuel quantity transmitter float arm during refueling, which can result in inaccurate quantity indication, accomplish the following:
Within 50 hours' time in service after the effective date of this AD but no later than March 1, 1970, remove the fuel quantity transmitter from each fuel tank and install new Cessna P/N 12341-667-1 and 12341-667-2 fuel gauge transmitters in accordance with the instructions contained in Cessna Service Letter No. SE69-25. dated December 9, 1969, or any other method approved by the Chief, Engineering and Manufacturing Branch, FAA, Central Region.
This amendment becomes effective January 3, 1970.