| AD Number | 87-06-07 | Status | Active |
| Effective Date | April 06, 1987 | Issue Date | Not specified |
| Docket Number | Unknown | Amendment | 39-5574 |
| Product Type | ["Appliance"] | Product Subtype | Not specified |
| CFR Part | --- - Part 39 | CFR Section | N/A |
| Citation | This information is not available. | ||
| Manufacturer(s) | Weber Aircraft |
| Model(s) | Seat Track Fittings |
87-06-07 WEBER AIRCRAFT: Amendment 39-5574. Applies to Ancra part number 45238-10 (Weber SCD 833437-401) and Ancra part numbers 45232-10, -11, -12 (Weber SCD 833509-401, 403, 405) aft seat track fittings used on Weber Aircraft TSO C39a passenger and flight attendant seats.
NOTE: Part numbers are not marked on the individual seat track fittings. Weber Service Bulletins Nos. 833437-25-505, dated March 14, 1986, and 833509-25-508, dated June 15, 1986, describe how these fittings can be identified and list the seat assembly part numbers, seat assembly serial numbers, aircraft, and aircraft customer on which these seat track fittings were installed by Weber.
Compliance required within 90 days after the effective date of this AD, unless previously accomplished.
To eliminate aft seat track fittings from service which do not meet minimum airworthiness requirements and would not provide required seat restraint in the event of an emergency landing, accomplish the following:A. Replace the seat track fittings in accordance with Weber Aircraft Service Bulletins Nos. 833437-25-505, dated March 14, 1986, and 833509-25-508, dated June 15, 1986, or later FAA-approved revisions.
B. Alternate means of compliance which provide an acceptable level of safety may be used when approved by the Manager, Western Aircraft Certification Office, FAA, Northwest Mountain Region.
C. Special flight permits may be issued in accordance with FAR 21.197 and 21.199 to ferry aircraft to a maintenance base in order to comply with the requirements of this AD.
All persons affected by this directive who have not already received the appropriate service documents from the manufacturer may obtain copies upon request to Weber Aircraft, 2820 Ontario Street, Burbank, California 91504. These documents may be examined at the FAA, Northwest Mountain Region, 17900 Pacific Highway South, Seattle, Washington, or Western Aircraft Certification Office at 15000 Aviation Boulevard, Hawthorne, California.
This amendment becomes effective April 6, 1987.