| AD Number | 50-15-01 | Status | Active |
| Effective Date | Not specified | Issue Date | Not specified |
| Docket Number | Unknown | Amendment | N/A |
| Product Type | ["Aircraft"] | Product Subtype | ["Small Airplane"] |
| CFR Part | --- - Part 39 | CFR Section | N/A |
| Citation | This information is not available. | ||
| Manufacturer(s) | Grumman American Aviation Corporation |
| Model(s) | G-21A (Army OA-9, Navy JRF-1, -2, -3, -4, -5, and -6B) |
50-15-01 GRUMMAN: Applies to All Model G-21A Aircraft (Converted JRF-5, JRF- 6B) Equipped With Reverse Direction Mixture Controls.
Compliance required not later than next 25-hour inspection.
To conform with conventional mixture control operation ("forward" for full rich position) on aircraft equipped with Bendix NAR9B carburetors with manual mixture control, rotate the position of the mixture bellcranks 180 degrees on the carburetors and reverse the tooth segments on the cockpit control end for end. Revise the cockpit control placard accordingly.
On aircraft equipped with Bendix NAR9C2 carburetors with automatic mixture control, the cockpit quadrant is already arranged in the correct sense and requires no revision. It should be noted that an additional Manual Lean position is provided forward of Full Rich and caution must be exercised to prevent inadvertently positioning the control incorrectly if the Manual Lean sector of the quadrant is retained.
This supersedes AD 48-14-02.