| AD Number | 56-09-02 | Status | Active |
| Effective Date | Not specified | Issue Date | Not specified |
| Docket Number | Unknown | Amendment | N/A |
| Product Type | ["Aircraft"] | Product Subtype | ["Large Airplane"] |
| CFR Part | --- - Part 39 | CFR Section | N/A |
| Citation | This information is not available. | ||
| Manufacturer(s) | Martin-Marietta Corporation |
| Model(s) | 202 202A 404 |
56-09-02 MARTIN: Applies to All Models 202, 202A, and 404 Aircraft.
Compliance required by September 1, 1956.
In order to eliminate shearing of rivets securing the rudder torque tube flange, P/N 2021U42196, to the rudder torque tube, P/N 2021D19331, caused by gust buffeting with gust locks not engaged and resulting in loss of adequate and/or positive rudder control, it is necessary to replace the 3/16-inch rivets with 1/4-inch 24ST heat treated rivets.
(Martin Service Instruction Letters No. 202/202A-36 and No. 404-69 cover this same subject.)