| AD Number | 48-50-04 | Status | Active |
| Effective Date | Not specified | Issue Date | Not specified |
| Docket Number | Unknown | Amendment | N/A |
| Product Type | ["Aircraft"] | Product Subtype | ["Large Airplane"] |
| CFR Part | --- - Part 39 | CFR Section | N/A |
| Citation | This information is not available. | ||
| Manufacturer(s) | Kelowna Flightcraft R & D Ltd. |
| Model(s) | 240 Series |
48-50-04 CONVAIR: Applies to All Model 240 Aircraft.
Compliance required by May 1, 1949.
1. Install steel nose gear upper centering cam, Bendix P/N 157627 in lieu of bronze cam.
2. Install main nose landing gear shock strut bearing and packing nut lock pins, in six places, Bendix P/N 54201 in lieu of lock rings.
3. Rework nose gear steering mechanism.
4. Install nose gear centering guides in nose wheel well.
(Consolidated-Vultee Aircraft Corp. Service Bulletin Nos. 240-104A, -161, -162A, -167, and -201; CVAC Service Information Letter No. 310, and Bendix Service Bulletin No. L. G. 504, also cover these same subjects.)