| AD Number | 55-08-01 | Status | Active |
| Effective Date | Not specified | Issue Date | Not specified |
| Docket Number | Unknown | Amendment | N/A |
| Product Type | ["Appliance"] | Product Subtype | Not specified |
| CFR Part | --- - Part 39 | CFR Section | N/A |
| Citation | This information is not available. | ||
| Manufacturer(s) | Beech |
| Model(s) | Safety Belt Buckles |
55-08-01 BEECH SAFETY BELT BUCKLES: Applies to All Beech Safety Belt Buckles, P/N 113652.
Compliance required as soon as possible but not later than September 1, 1955.
Inspect Beech safety buckles by checking the buckle lever attachment pin for snap ring retainers installed at each end.
All Beech buckles with buckle lever dowel type attaching pin retainers in lieu of buckle lever attaching pins with snap ring retainers should be retired from service by replacement with the newer improved safety buckle with through pin and snap ring retainers.
(Beech Service Bulletin No. OS-55-1 issued January 25, 1955, covers this same subject.)