| AD Number | 64-07-03 | Status | Active |
| Effective Date | April 10, 1964 | Issue Date | Not specified |
| Docket Number | Unknown | Amendment | 39-700 |
| Product Type | ["Propeller"] | Product Subtype | Not specified |
| CFR Part | --- - Part 39 | CFR Section | N/A |
| Citation | This information is not available. | ||
| Manufacturer(s) | Univair Aircraft Corporation |
| Model(s) | F12A-3 F12A-5 |
64-07-03 FLOTTORP: Amdt. 700 Part 507 Federal Register March 11, 1964. Applies to All F12A-3 and F12A-5 Series Propellers with FS200-1 Propeller Spinner.
Compliance required as indicated.
Within 15 hours' time in service after the effective date of this AD, accomplish the following rework unless already accomplished:
Remove the six AN 4H7A bolts attaching the 248-1 spinner bulkhead to the propeller flange and reinstall six shorter AN 4H6A bolts. The old AN 960-416L washers may be reused. Torque bolts to 70 to 90 inch- pounds. Safety wire all boltheads with MS20995-C32 safety wire.
This directive effective April 10, 1964.