| AD Number | 62-23-01 | Status | Active |
| Effective Date | November 19, 1962 | Issue Date | Not specified |
| Docket Number | Unknown | Amendment | N/A |
| Product Type | ["Appliance"] | Product Subtype | Not specified |
| CFR Part | --- - Part 39 | CFR Section | N/A |
| Citation | This information is not available. | ||
| Manufacturer(s) | Auto Crat Manufacturing Company |
| Model(s) | Safety Belts |
62-23-01 AUTO CRAT MANUFACTURING COMPANY SAFETY BELT: Amdt. 409 Part 507 Federal Register October 26, 1962. Applies to All Aircraft Equipped With Auto Crat Models BN 1-2001, BN 3-1501, BN 3-6001, or BN 3-7001 Series Safety Belts.
Compliance required within the next 25 hours' time in service after the effective date of this AD.
It has been determined that Auto Crat Models BN 1-2001, BN 3-1501, BN 3-6001, or BN 3-7001 Series safety belts, not intended for aircraft use and which do not fully comply with the requirements of Technical Standard Order C22, have been improperly marked with TSO-C22 identification. Accordingly, Auto Crat belt assemblies identified with these model numbers shall be replaced with belt assemblies that conform to TSO-C22 standards.
This directive effective November 19, 1962.