| AD Number | 75-22-08 | Status | Active |
| Effective Date | November 03, 1975 | Issue Date | Not specified |
| Docket Number | Unknown | Amendment | 39-2402 |
| Product Type | ["Aircraft"] | Product Subtype | ["Rotorcraft"] |
| CFR Part | --- - Part 39 | CFR Section | N/A |
| Citation | This information is not available. | ||
| Manufacturer(s) | Airbus Helicopters |
| Model(s) | SA330F SA330G |
75-22-08 SOCIETE NATIONALE INDUSTRIELLE AEROSPATIALE: Amendment 39- 2402. Applies to SA330F and SA330G helicopters certificated in all categories, equipped with external hoists AE-76 360-100 or AE-76 360-110-01.
Compliance is required within the next 10 hours' time in service after the effective date of this AD, unless already accomplished. To ensure proper functioning of the pyrotechnic shears, accomplish the following:
(a) Inspect electrical connections ME 24F and ME 25F on mobile connector 52 Ma of the pyrotechnic shears control for proper connections.
(b) Electrical connections which are improperly connected must be disassembled, reconnected and checked in accordance with paragraph 2.B of Aerospatiale Service Bulletin No. 45.06, dated April 2, 1975, or an FAA-approved equivalent.
This amendment becomes effective November 3, 1975.