| AD Number | 47-32-05 | Status | Active |
| Effective Date | Not specified | Issue Date | Not specified |
| Docket Number | Unknown | Amendment | N/A |
| Product Type | ["Aircraft"] | Product Subtype | ["Rotorcraft"] |
| CFR Part | --- - Part 39 | CFR Section | N/A |
| Citation | This information is not available. | ||
| Manufacturer(s) | Scotts-Bell 47 Inc |
| Model(s) | 47B |
47-32-05 BELL: (Was Mandatory Note 5 of AD-1H-1.) Applies to Model 47B.
Compliance required before next flight.
Remove the main rotor mast spinner assembly from all Model 47B helicopters, in order that the possibility of its jamming the mast control tubes, in the event it becomes loose during flight, is eliminated.
(Bell Service Bulletin 47C38 dated May 15, 1947, also covers this same subject.)