| AD Number | 62-20-02 | Status | Active |
| Effective Date | October 09, 1962 | Issue Date | Not specified |
| Docket Number | Unknown | Amendment | N/A |
| Product Type | ["Aircraft"] | Product Subtype | ["Large Airplane"] |
| CFR Part | --- - Part 39 | CFR Section | N/A |
| Citation | This information is not available. | ||
| Manufacturer(s) | D & R Nevada LLC |
| Model(s) | 22 22M 30 30A |
62-20-02 GENERAL DYNAMICS/CONVAIR: Amdt. 482 Part 507 Federal Register September 8, 1962. Applies to All Models 22, 22M and 30 Series Aircraft.
Compliance required within the next 350 hours' time in service from the effective date of this AD, unless already accomplished.
To prevent the aileron override spring from jamming in the compressed position if full opposition loads are applied to the lateral control system, the aileron override spring assembly shall be modified to incorporate a stop in accordance with General Dynamics/Convair Service Bulletins A27-56, A27-25, or A27-26 for the Models 22, 22M or 30, respectively, or in accordance with an FAA engineering approved equivalent.
(General Dynamics/Convair Alert Service Bulletin A27-56 for the Model 22, A27-25 for the Model 22M, and A27-26 for the Model 30 cover this same subject.)
This directive effective October 9, 1962.