Back to AD

AD 80-02-08 ACTIVE

Rudder Balance Attach Bolts
Key Information
AD Number 80-02-08 Status Active
Effective Date January 21, 1980 Issue Date Not specified
Docket Number Unknown Amendment 39-3664
Product Type ["Aircraft"] Product Subtype ["Small Airplane"]
CFR Part --- - Part 39 CFR Section N/A
Citation This information is not available.
Applicability
Manufacturer(s) Augustair, Inc.
Model(s) 2150 2150A
Regulatory Text

80-02-08 VARGA AIRCRAFT CORPORATION (Morrisey): Amendment 39-3664. Applies to Varga Model 2150 and 2150A series airplanes certificated in all categories. Compliance required within the next ten (10) hours' time in service from the effective date of this AD, unless already accomplished. To prevent jamming of the rudder cables on the rudder balance weight attach bolts, accomplish the following: \n\n\t(a)\tRemove the two bolts attaching the rudder balance weight to the static balance arm and reinstall these bolts head downward, as shown in Figure 1 of this AD. \n\n\n\n\n\t(b)\tAlternative inspections, modifications or other actions which provide an equivalent level of safety may be used when approved by the Chief, Aircraft Engineering Division, FAA Western Region. \n\n\tThis amendment becomes effective January 21, 1980.