Back to AD

AD 82-10-03 ACTIVE

Hydraulic Tube Assemblies
Key Information
AD Number 82-10-03 Status Active
Effective Date June 11, 1982 Issue Date Not specified
Docket Number Unknown Amendment 39-4375
Product Type ["Aircraft"] Product Subtype ["Large Airplane"]
CFR Part --- - Part 39 CFR Section N/A
Citation This information is not available.
Applicability
Manufacturer(s) The Boeing Company
Model(s) 727-100 Series 727-100C Series 727-200 Series 727-200F Series 727 Series 727C Series
Regulatory Text

82-10-03 BOEING: Amendment 39-4375. Applies to Boeing Model 727 airplanes, line number 1 through 1612, certificated in all categories. Compliance is required within the next 2500 hours time-in-service from the effective date of this AD, unless already accomplished. To minimize the possibility of cross-connecting the ground spoiler hydraulic tube assemblies, accomplish either one of the following, unless already accomplished: \n\n\tA.\tReplace the ground spoiler hydraulic tube assemblies per figure 1 of Boeing Service Bulletin 727-27-202, Revision 1, dated December 18, 1981, or later revisions approved by the Chief, Seattle Area Aircraft Certification Office, FAA Northwest Mountain Region. \n\n\tB.\tColor code the ground spoiler hydraulic tube assemblies per figure 2 of the same bulletin. \n\n\tAlternate means of compliance with the AD which provide an equivalent level of safety may be used when approved by the Chief, Seattle Area Aircraft Certification Office, FAA Northwest Mountain Region. \n\n\tSpecial flight permits may be issued in accordance with FAR 21.197 and 21.199 to operate airplanes to a base for the accomplishment of inspections and/or modifications required by this AD. \n\n\tThis Amendment becomes effective June 11, 1982.