Back to AD

AD 75-08-13 ACTIVE

Wing Engine Nose Cowl
Key Information
AD Number 75-08-13 Status Active
Effective Date May 16, 1975 Issue Date Not specified
Docket Number Unknown Amendment 39-2165
Product Type ["Aircraft"] Product Subtype ["Large Airplane"]
CFR Part --- - Part 39 CFR Section N/A
Citation This information is not available.
Applicability
Manufacturer(s) The Boeing Company
Model(s) DC-10-10 DC-10-10F DC-10-30 DC-10-30F (KC-10A, KDC-10)
Regulatory Text

75-08-13 MCDONNELL DOUGLAS: Amendment 39-2165. Applies to Model DC-10-10, DC-10-10F, DC-10-30, and DC-10-30F airplanes certificated in all categories. \n\n\tCompliance required within the next 4000 flight hours after the effective date of this AD, unless already accomplished. \n\n\tTo minimize the possibility of losing a wing engine nose cowl due to severed nose cowl attach bolts and engine unbalance loads, modify the wing engine nose cowls per McDonnell Douglas DC-10 Service Bulletin 71-53, "Powerplant - Cowling - Modify Engine Nose Cowl Attachments," dated September 25, 1974, or later FAA-approved revisions, or an equivalent modification approved by the Chief, Aircraft Engineering Division, FAA Western Region. \n\n\tSpecial flight permits may be issued under FAR 21.197 and 21.199 for the purpose of moving the aircraft to a base to perform the requirements of this AD. \n\n\tThis amendment becomes effective May 16, 1975.