| AD Number | 75-06-09 | Status | Active |
| Effective Date | March 20, 1975 | Issue Date | Not specified |
| Docket Number | Unknown | Amendment | 39-2129 |
| Product Type | ["Aircraft"] | Product Subtype | ["Small Airplane"] |
| CFR Part | --- - Part 39 | CFR Section | N/A |
| Citation | This information is not available. | ||
| Manufacturer(s) | Textron Aviation Inc. |
| Model(s) | 60 A60 |
75-06-09 BEECH: Amendment 39-2129. Applies to Models 60 and A60 (Serial Numbers P-3 through P-200) airplanes with more than 150 hours' time in service.
Compliance: Required as indicated, unless already accomplished.
To prevent malfunctions of the elevator inboard hinge supports, within the next 100 hours' time in service after the effective date of this AD, accomplish the following:
Remove the left and right elevator inboard hinge supports (P/N 60-524078-1 and 60- 524078-2) and install improved supports in accordance with Beech Kit No. 60-4005 or any equivalent modification approved by the Chief, Engineering and Manufacturing Branch, FAA, Central Region.
Beechcraft Service Instruction No. 0342-132, Revision III, or later revision refers to this subject.
This amendment supersedes Amendment 39-1463, AD 72-13-01.
This amendment becomes effective March 20, 1975.