| AD Number | 53-12-01 | Status | Active |
| Effective Date | Not specified | Issue Date | Not specified |
| Docket Number | Unknown | Amendment | N/A |
| Product Type | ["Aircraft"] | Product Subtype | ["Rotorcraft"] |
| CFR Part | --- - Part 39 | CFR Section | N/A |
| Citation | This information is not available. | ||
| Manufacturer(s) | Hiller Aviation |
| Model(s) | UH-12 UH-12A UH-12B |
53-12-01 HILLER: Applies to All UH-12, UH-12A, UH-12B, HTE-1, HTE-2, H-23A and H-23B Helicopters Incorporating Horizontal Stabilizers With Short Spar Inserts or Without Spar Inserts.
Compliance required as indicated below.
Replacement of the horizontal stabilizer assembly, P/N 37001 on the above helicopters has been found necessary to prevent fatigue failure of the stabilizer spar.
(Hiller Service Bulletin No. 26 covers this procedure.)
(a) Stabilizer assemblies P/N 37001-9 incorporating short spar inserts (5.75 inches) must be removed from service when they have accumulated 300 hours total time. The replacement stabilizer is identified as 37001-14 and incorporates a long spar insert.
(b) Stabilizer assemblies P/N 37001-7 (without spar insert and identified as 37001) must be removed from service when they have accumulated 1,600 hours total time. The replacement stabilizer is identified as 37001-12 and incorporates a long spar insert.
(c) Stabilizer assemblies P/N 37001-12 and -14 incorporate long spar inserts (10.29 inches). Attachment to the aft bulkhead socket is made by two AN 174-17 bolts. The total service life of these assemblies is not limited.