| AD Number | 47-07-04 | Status | Active |
| Effective Date | Not specified | Issue Date | Not specified |
| Docket Number | Unknown | Amendment | N/A |
| Product Type | ["Aircraft"] | Product Subtype | ["Small Airplane"] |
| CFR Part | --- - Part 39 | CFR Section | N/A |
| Citation | This information is not available. | ||
| Manufacturer(s) | Fairchild Hiller Corporation |
| Model(s) | M-62A M-62A-3 M-62A-4 M-62B M-62C |
47-07-04 FAIRCHILD: (Was Mandatory Note 6 of AD-724-2.) Applies to M-62 Series Aircraft.
Compliance required at next periodic inspection.
In order to eliminate the possibility of the control sticks becoming disengaged, both front and rear control sticks should be reworked by drilling through stick and socket, and installing and safetying an AN393-51 clevis pin. Washer AN 960-10L and cotter AN 380-2-2.
(Fairchild Service Bulletin 44-62-2 dated October 31, 1944, covers this same subject.)