| AD Number | 48-11-04 | Status | Active |
| Effective Date | Not specified | Issue Date | Not specified |
| Docket Number | Unknown | Amendment | N/A |
| Product Type | ["Aircraft"] | Product Subtype | ["Small Airplane"] |
| CFR Part | --- - Part 39 | CFR Section | N/A |
| Citation | This information is not available. | ||
| Manufacturer(s) | Sky Enterprises, Inc. |
| Model(s) | RC-3 |
48-11-04 REPUBLIC: Applies to Model RC-3 Aircraft.
Compliance required by April 15, 1948.
To provide security for the hydraulic pump handle attachment, the four self-locking nuts now used should be replaced by three AN 310-4 and one AN 310-5 castle nuts and cotters. The fulcrum bolt is already drilled for a cotter. The present clevis bolts may be drilled for the cotter or may be replaced by two AN 24-17 and one AN 24-13 clevis bolts.
(Republic Service Bulletin No. 22 covers this same subject.)