| AD Number | 68-07-09 | Status | Active |
| Effective Date | November 16, 1968 | Issue Date | Not specified |
| Docket Number | Unknown | Amendment | 39-682 |
| Product Type | ["Aircraft"] | Product Subtype | ["Small Airplane"] |
| CFR Part | --- - Part 39 | CFR Section | N/A |
| Citation | This information is not available. | ||
| Manufacturer(s) | Cessna Aircraft Company |
| Model(s) | 177 |
68-07-09 CESSNA: Amdt. 39-682. Applies to Model 177, Serial Numbers 177-00001 through 177-01152, aircraft.
Compliance: Required as indicated, unless already accomplished.
To prevent oscillation in the longitudinal control system, accomplish the following:
(a) Within 10 hours' time in service after the effective date of this airworthiness directive, modify the flap system by the installation of Cessna P/N 170094-1, in accordance with the instructions contained in Cessna Service Letter No. SE68-13, dated March 30, 1968, or any other method approved by the Chief, Engineering and Manufacturing Branch, Federal Aviation Administration, Central Region.
(b) Cessna P/N 170094-1 referred to in paragraph (a) may be removed when Cessna P/N 1709007-1 is installed in accordance with Cessna Service Letter SE68-14, operation 23 and attachments, dated April 11, 1968, as revised April 22, 1968, or when any other modification is installed which has been approved by Chief, Engineering and Manufacturing Branch, Federal Aviation Administration, Central Region.
This amendment becomes effective November 16, 1968.