| AD Number | 78-24-02 | Status | Active |
| Effective Date | November 24, 1978 | Issue Date | Not specified |
| Docket Number | Unknown | Amendment | 39-3346 |
| Product Type | ["Aircraft"] | Product Subtype | ["Rotorcraft"] |
| CFR Part | --- - Part 39 | CFR Section | N/A |
| Citation | This information is not available. | ||
| Manufacturer(s) | Agusta S.p.A. |
| Model(s) | A109 A109A A109A II A109C A109E A109K2 |
78-24-02 COSTRUZIONI AERONAUTICHE GIOVANNI AGUSTA: Amendment 39- 3346. Applies to Agusta Model A109 Series helicopters, S/N 7107, 7111, 7126, and 7129, certificated in all categories.
Compliance required before further flight, unless already accomplished, but helicopter may be flown in accordance with FAR 21.197 and 21.199 to a base where the required work can be performed.
To prevent possible failure of main transmission P/N 109-0400-02-01, remove pinion gear P/N 109- 0403-06-01, S/N 18, 24, 25 or 27, from main transmissions S/N 31, 36, 11 and 10, respectively, and replace with new pinion gear of same part number having serial number other than 17 through 32.
This amendment is effective November 24, 1978, as to all persons except those persons to whom it was made immediately effective by the letter dated April 26, 1978, which contained this amendment