| AD Number | 47-32-01 | Status | Active |
| Effective Date | Not specified | Issue Date | Not specified |
| Docket Number | Unknown | Amendment | N/A |
| Product Type | ["Aircraft"] | Product Subtype | ["Rotorcraft"] |
| CFR Part | --- - Part 39 | CFR Section | N/A |
| Citation | This information is not available. | ||
| Manufacturer(s) | Scotts-Bell 47 Inc |
| Model(s) | 47B |
47-32-01 BELL: (Was Mandatory Note 1 of AD-1H-1.) Applies Only to Model 47B Serial Numbers 2 Through 13.
Compliance required at next 100-hour inspection.
Rework the stabilizer damper frame clamp with a 1/16-inch saw cut, as shown in Bell Service Bulletin No. 47C7, revised June 12, 1947, in order to permit a clamping action which will prevent the loosening of the subject part of the main rotor mast.