| AD Number | 47-25-03 | Status | Active |
| Effective Date | Not specified | Issue Date | Not specified |
| Docket Number | Unknown | Amendment | N/A |
| Product Type | ["Aircraft"] | Product Subtype | ["Small Airplane"] |
| CFR Part | --- - Part 39 | CFR Section | N/A |
| Citation | This information is not available. | ||
| Manufacturer(s) | Superior Aircraft Company |
| Model(s) | V |
47-25-03 CULVER: (Was Mandatory Note 5 of AD-778-2.) Applies Only to Serial Numbers V-1 to V-130, Inclusive.
Compliance required prior to August 15, 1947.
Inspect the nose gear drag link for the type of connection used to attach the aft fitting. The 3/4-inch diameter tube must butt the aft fitting. If otherwise, replace the link or rework accordingly.
(Culver Service Bulletin No. 1 covers this same subject.)