Back to AD

AD 46-13-01 ACTIVE

Landing Gear Hose Ferrules
Key Information
AD Number 46-13-01 Status Active
Effective Date Not specified Issue Date Not specified
Docket Number Unknown Amendment N/A
Product Type ["Aircraft"] Product Subtype ["Large Airplane"]
CFR Part --- - Part 39 CFR Section N/A
Citation This information is not available.
Applicability
Manufacturer(s) Lockheed Aircraft Corporation
Model(s) 18
Regulatory Text

46-13-01 LOCKHEED: (Was Service Note 2 of AD-723-2.) Applies to All Model 18 Aircraft.
When replacing the landing gear actuating cylinder flexible hose, P/N 55252-3, the length of ferrules should be compared. If longer ferrules are found on the new hoses, an elbow should be inserted between the hose and the cylinder aft port, to prevent possible damage to the hose by the landing gear scissors. (Lockheed Service Letter No. 18-28, dated June 15, 1945, revised December 10, 1945, covers this same subject.)