| AD Number | 74-04-05 | Status | Active |
| Effective Date | February 20, 1974 | Issue Date | Not specified |
| Docket Number | Unknown | Amendment | 39-1788 |
| Product Type | ["Aircraft"] | Product Subtype | ["Large Airplane"] |
| CFR Part | --- - Part 39 | CFR Section | N/A |
| Citation | This information is not available. | ||
| Manufacturer(s) | Bombardier Inc. |
| Model(s) | CL-44D4 CL-44J |
74-04-05 CANADAIR: Amdt. 39-1788. Applies to all CL-44D4 and CL-44J airplanes with more than 20,000 hours' time in service. To detect cracks in the main landing gear uplock attachment fitting, P/N 44-10162 and -1, accomplish the following:
1. Within the next 100 hours' time in service after the effective date of this AD, unless accomplished within the last 400 hours' time in service, and at intervals thereafter not to exceed 500 hours' time in service, inspect the main landing gear uplock attachment fitting, P/N 44-10162 and -1 at the four corners of the lug for cracks using a dye penetrant inspection with a glass of at least 10-power or an approved equivalent inspection.
2. Cracked parts must be replaced before further flight, or repaired before further flight as specified in paragraphs 1(a) and (b) of the Inspection Procedure of Canadair's Service Information Circular 374-CL-44 or with an approved equivalent repair.
3. The compliance times may be increased by the Chief, Engineering and Manufacturing Branch, FAA, Eastern Region, upon receipt of substantiating data submitted through an FAA maintenance inspector.
4. Equivalent inspections, parts or repairs must be approved by the Chief, Engineering and Manufacturing Branch, FAA, Eastern Region.
This amendment is effective February 20, 1974.