| AD Number | 47-50-04 | Status | Active |
| Effective Date | Not specified | Issue Date | Not specified |
| Docket Number | Unknown | Amendment | N/A |
| Product Type | ["Aircraft"] | Product Subtype | ["Small Airplane"] |
| CFR Part | --- - Part 39 | CFR Section | N/A |
| Citation | This information is not available. | ||
| Manufacturer(s) | Consolidated Vultee Aircraft Corporation, Stinson Division |
| Model(s) | L-5 L-5B L-5C L-5D L-5E L-5E-1 L-5G |
47-50-04 STINSON: Applies to L-5 Series Aircraft.
Compliance required as soon as possible but not later than March 1, 1948.
To prevent loss of elevator control, the elevator push-pull tube assemblies, P/N 76-62204, should be inspected for security and proper staking of nut which secures rod end and D-4 bearing in housing P/N 76-62206. If there is no cotter pin securing this nut, it should be staked to the rod in at least three places.