| AD Number | 46-30-01 | Status | Active |
| Effective Date | Not specified | Issue Date | Not specified |
| Docket Number | Unknown | Amendment | N/A |
| Product Type | ["Aircraft"] | Product Subtype | ["Small Airplane"] |
| CFR Part | --- - Part 39 | CFR Section | N/A |
| Citation | This information is not available. | ||
| Manufacturer(s) | Don Luscombe Aviation History Foundation, Inc. |
| Model(s) | 8A |
46-30-01 LUSCOMBE: (Was Mandatory Note 1 of AD-694-4.) Applies Only to Model 8A Serial Numbers 2201 to 2614 Inclusive; 2616 to 2632 Inclusive; 2635, 2637, 2639, 2642, and 2645.
Compliance required prior to completion of next 10 hours of operation.
Replace the adjustment screw now installed in the lower end of the control stick horn, which is located beneath the floor boards with an AN 520-10-44 screw in order to prevent interference with the lower fuselage skin on the forward flange of the landing gear bulkhead.
(Luscombe Service Bulletin No. 2-46 covers this same subject.)