79-15-05 MCDONNELL DOUGLAS: Amendment 39-3515. Applies to Model DC-10-10, -10F, -30, -30F, -40 series airplanes certificated in all categories. Compliance required as indicated. To assure immediate indication to the flight crew of any asymmetric wing slat condition, accomplish the following: \n\n\ta.\tBefore further flight, after the effective date of this AD: \n\n\t\t(1)\tInstall two auto throttle/speed control computers in accordance with FAA approved type design data to provide stall warning based on both right and left angle of attack sensors and on the positions of both outboard wing slat groups in addition to previously required inputs, or; \n\n\t\t(2)\tModify the stall warning and auto slat system to provide information from two angle of attack sensors and the positions of both outboard wing slat groups to a single auto throttle/speed control computer in accordance with design data approved by the Chief, Aircraft Engineering Division, FAA Western Region. \n\n\tNOTE: The stall warning and auto slat functions of the auto throttle/speed control computer are the functions required by this AD. \n\n\tb.\tWithin 30 days after the effective date of this AD, add the following to the limitations section of the FAA approved Airplane Flight Manual: \n\n\t"TAKEOFF WARNING \n\n\tThe slat function of the takeoff warning system must be operative for takeoff." \n\n\tc.\tSpecial flight permits may be issued in accordance with FAR 21.197 and 21.199 to operate airplanes to a base for the accomplishment of modifications required by this AD. \n\n\td.\tAlternative modifications or other actions which provide an equivalent level of safety may be used when approved by the Chief, Aircraft Engineering Division, FAA Western Region. \n\n\tThis amendment becomes effective July 13, 1979.