Back to AD

AD 74-18-10 ACTIVE

Horizontal Stabilizer and Elevator
Key Information
AD Number 74-18-10 Status Active
Effective Date Not specified Issue Date Not specified
Docket Number Unknown Amendment 39-1945
Product Type ["Aircraft"] Product Subtype ["Large Airplane"]
CFR Part --- - Part 39 CFR Section N/A
Citation This information is not available.
Applicability
Manufacturer(s) The Boeing Company
Model(s) 707-100 Long Body 707-100B Long Body 707-100B Short Body 707-200 707-300 Series 707-300B Series 707-300C Series 707-400 Series 720 Series 720B Series
Regulatory Text

74-18-10 BOEING: Amendment 39-1945. Applies to all model 707/720 series airplanes, certificated in all categories. \n\n\tCompliance required as indicated. \n\tTo prevent potential oscillatory longitudinal flight on Boeing models 707/720 series airplanes, accomplish the following: \n\tBy September 1, 1976, unless already accomplished, inspect and adjust the contour mismatch of the upper surfaces between the horizontal stabilizer and elevator in accordance with Boeing Service Bulletin No. 3151, or later FAA approved revisions or in a manner approved by the Chief, Engineering and Manufacturing Branch, FAA Northwest Region. \n\n\tThis amendment becomes effective thirty (30) days after publication in the Federal Register.