| AD Number | 60-05-03 | Status | Active |
| Effective Date | Not specified | Issue Date | October 26, 1960 |
| Docket Number | Unknown | Amendment | N/A |
| Product Type | ["Aircraft"] | Product Subtype | ["Small Airplane"] |
| CFR Part | --- - Part 39 | CFR Section | --- - _EMPTY_ |
| Citation | This information is not available. | ||
| Manufacturer(s) | Piper Aircraft Inc. |
| Model(s) | PA-22-150 PA-22-160 |
60-05-03 PIPER: Amdt. 108 Part 507 Federal Register March 2, 1960. Applies to PA-22 "150" and PA-22 "160" Aircraft Serial Numbers 22-3218, 22-3387, 22-3388 to 22-7049 Inclusive, and 22-7054.
Compliance required by April 1, 1960.
Install safety belt extension, P/N 14920-02 or equivalent, on the front seat belt in order to eliminate deterioration due to heat from the rear seat heater outlet and chafing where the web attaches to the attaching lug. P/N 14920-02 has the same geometric design as P/N 14920-0 being replaced, except that P/N 14920-02 is one inch longer measuring 3.5 inches between bolt centerlines.
(Piper Service Bulletin No. 184 covers this same subject.)
This supersedes AD 57-17-02.
Revised November 2, 1960.